Avanti DG24CSS - Manual (Page 8)

INSTALLATION OF YOUR GAS RANGE
a WARNING®
HAVE THIS RANGE INSTALLED BY A QUALIFIED INSTALLER.
Improper
installation, adjustment, alteration, services, or
maintenance can cause injury or property damage. Consult a
qualified installer, service agency or the gas supplier.
^ Leveling of Range
The range must be level to obtain proper cooking results. The screwed
leveling legs located on the corner brackets at the bottom of range
should be adjusted by turning them clockwise to make the range higher
or counter-clockwise to lower the range until the range is level (See
Figure 1). Use a level on the cookware supports to check the leveling of
the range.
Fi 2 ure 1
Anti-Tip Bracket Installation
To reduce the risk of tipping the appliance by abnormal usage or improper door loading, the
appliance must be secured by properly installing the anti-tip device packed with the
appliance.
1. Place the anti-tip bracket on the floor as shown in Figure 3. If there is no sidewall, the
dimension given as 1/8" will be the distance of right/left side of appliance to right/ieft side
of anti-tip bracket. Anti-tip bracket can be installed on either right or left side.
2. Mark the locations of 2 holes of anti-tip bracket on the floor.
3. Use a 5/16" masonry drill bit and insert plastic anchor.
4. Secure bracket to floor using screws supplied.
5. Slide appliance into position. (Figure 2)
Fieure 2
leCnOSEjRQ