Cisco WRTP54G User Manual
Page 23
Wireless-G Broadband Router with 2 Phone Ports
15
Chapter 5: Configuring the Router
Overview
Access Restrictions
•
Filter. To block specific users from Internet access, you can set up IP address, port, and MAC address
filtering.
•
Device Access Control. Use this screen to control remote access of the Router.
Applications & Gaming
•
Port Range Forwarding. Set up public services or other specialized Internet applications on your network.
•
Port Triggering. To set up triggered ranges and forwarded ranges for Internet applications, click this tab.
•
DMZ. Click this tab to allow one local user to be exposed to the Internet for use of special-purpose services.
•
QoS. Enable QoS (Quality of Service) to maximize network performance.
Administration
•
Management. On this screen, alter the Router’s user name, password, and UPnP settings.
•
Log. If you want to view or save activity logs, click this tab.
•
Factory Defaults. If you want to reset the Router to its factory default settings, then you will need a password
available only from Vonage. Contact Vonage for more information.
Status
•
Local Network. This provides status information about the local network.