Compaq RAID ARRAY 3000 EK-SMCPO-UG. C01 - Manual (Page 103)

Second Controller Option 5-7
Compaq Confidential – Need to Know Required
Writer: Bob Young Project: RAID Array 3000 Pedestal Storage Subsystem Hardware User’s Guide Comments:
Part Number: EK-SMCPO-UG. C01 File Name: f-ch5 Second Controller Option.doc Last Saved On: 12/4/00 1:48 PM
Installing Two SIMMs into Second Controller
1. Install two of the SIMM modules into the second controller (make sure
all SIMM modules are of the same type) by aligning the connector pins
and inserting the modules into the SIMM module connectors as shown
in Figure 5-6.
Figure 5-6. Insert SIMM into connector
2. Ensure the SIMM is firmly seated and then gently pivot it toward the
controller board until it snaps into place as shown in Figure 5-7.
Figure 5-7. Pivot SIMM down to seat