Lexmark E260dn - Manual (Page 89)

Replace photoconductor
- Blinking
- Blinking
- On
When any of the light sequences occur, order a new photoconductor kit. While the printer may continue to function
properly after the photoconductor kit has reached its official end-of-life, print quality significantly decreases.
Note: The photoconductor kit is a single item.
To replace the photoconductor kit:
1 Turn off the printer.
2 Pull the photoconductor kit and toner cartridge together as a unit out of the printer by pulling on the toner cartridge
handle.
Note: The photoconductor kit and toner cartridge form a unit.
Maintaining the printer
89