How to connect your cd player, vcr, or computer, How to connect your portable cd player – NordicTrack NTE11920 User Manual

Page 17

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

HOW TO CONNECT YOUR CD PLAYER, VCR,

OR COMPUTER

To use iFIT.com CD’s, the elliptical exerciser must be

connected to your portable CD player, portable stereo,
home stereo, or computer with CD player. See pages

17 and 18 for connecting instructions. To use iFIT.com

videocassettes, the elliptical exerciser must be con

nected to your VCR, See page 19 for connecting
instructions. To use iFIT.com programs directiy from

our Web site, the elliptical exerciser must be connect
ed to your home computer. See page 18 for connect

ing instructions.

HOW TO CONNECT YOUR PORTABLE CD PLAYER

Note: if your CD player has separate LINE OUT and
PHONES jacks, see instruction A below. If your CD
player has only one Jack, see instruction B.

A, Plug one end of the audio cable into the jack

beneath the console. Plug the other end of the
cable into the LINE OUT jack on your CD player.

Plug your headphones into the PHONES jack.

Plug one end of the audio cable into the jack

beneath the console. Plug the other end of the
cable into a 1/8” Y-adapter {available at electronics
stores). Plug the Y-adapter into the PHONES jack
on your CD player. Plug your headphones into the
other side of the Y-adapter.

Note: If your stereo has an RCA-type AUDIO OUT

Jack, see instruction A below, if your stereo has a

1/8” LINE OUT Jack, see instruction B. If your

stereo has only a PHONES Jack, see instruction C.

A. Plug one end of the audio cable into the jack

beneath the console. Plug the other end of the cable
into the adapter. Plug the adapter into an AUDIO
OUT jack on your stereo.

HOW TO CONNECT YOUR PORTABLE STEREO

B. Plug one end of the audio cable into the jack

beneath the console. Plug the other end of the
cable into the LINE OUT jack on your stereo. Do
not use the adapter.

C. Plug one end of the audio cable into the jack

beneath the console. Plug the other end of the
cable into a 1/8” Y-adapter (available at electronics
stores). Plug the Y-adapter into the PHONES jack
on your stereo. Plug your headphones into the
other side of the Y-adapter.