Warning, Assembly instructions (continued) – Ryobi 170r User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

ASSEMBLY INSTRUCTIONS (Continued)

Fig. 9

8. Close the zipper on the bag (Fig. 9).

9. Align the vacuum bag/elbow tube assembly with the

grooves on the blower outlet (Fig. 10).

10. Install the vacuum bag/elbow tube assembly onto the

blower outlet. Turn assembly clockwise until it locks
(Fig. 10).

WARNING

Vacuum bag assembly must be used at all times
during vacuum mode to prevent personal injury
from objects being discharged from blower outlet

and to prevent overheating the motor.

NOTE; Make sure the angled end of the

vacuum tube is facing the bag.

Fig. 10