Ryobi RY09951 - Manual

50:1 Ratio = Mix 2.6 oz 2-cycle oil with
1 gallon of fresh gasoline in separate gas
container. SHAKE. Pour into fuel tank.
Pull starter handle sharply until
engine runs.
1 GALLON
GAS
RYOBI ART WORK
Art Part No. : 987000-755 Rev. 03
Where Used : 987000-755
Refer to Drawings for Dimensions.
987000-755
Pull starter handle sharply until
engine runs.
2.6
oz.
ENGINE STARTING PROCEDURE WARNING: This Engine Starting Procedure is not a substitute for reading
the operator’s manual. To reduce the risk of injury, user must read and under-
stand operator’s manual before using this product.
Material: 60lb. Stock Paper.
Color: Orange Yellow.
FRONT
Squeeze trigger to run.
For any questions about operating or maintaining your product, call the Ryobi ®
Help Line !
Your product has been fully tested prior to shipment to ensure your complete satisfaction.
Troubleshooting tips are also available in your operator’s manual.
Go to www.ryobitools.com and register your new tool on-line.
CALL
1-800-860-4050
www.ry
obitool
s.com
TO START A COLD ENGINE:
TO RESTART A WARM ENGINE:
2
4
3
1
5
Set lever to "START".
START
2
4
5
1
1
Slowly press the PRIMER BULB 10x or until fuel
appears.
3
10x
3-19-10 (REV:03)