Assembly - as a vacuum (optional for model 170r), Assembly instructions – Ryobi 170r User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ASSEMBLY INSTRUCTIONS
1. Install the blower tube onto the motor housing. Turn the
tube clockwise until it locks (Fig. 1).
2. Insert the blower nozzle tube onto the blower tube and
turn it clockwise to lock (Fig. 2).
NOTE: The blower tube and nozzle must be used
at all times to prevent overheating the
motor.
ASSEMBLY - AS A VACUUM
(Optional for Model 170r)
Two Speed
Switch
Vacuum
Elbow Tube
Vacuum Bag