Cuisinart FP-14 - Manual (Page 4)

3
IMPORTANT UNPACKING
INSTRUCTIONS
This package contains a Cuisinart Elite
Collection
® 14-Cup Food Processor and the
accessories for it: 14-, 11- and 4.5-cup work
bowls, work bowl cover, metal chopping/mixing
blade, dough blade, adjustable slicing disc,
reversible shredding disc, stem adapter, large
and small pushers, spatula, accessory storage
case, cleaning tool and instruction/recipe book.
CAUTION: THE CUTTING TOOLS HAVE VERY
SHARP EDGES. To avoid injury when
unpacking the parts, please follow these
instructions.
1. Place the box on a low table or on the
floor next to the kitchen counter where
you intend to keep the food processor.
Be sure the box is right side up.
2. Open top flaps—there will be a rectangular
block of foam that holds the processor
parts, each fitted into a cavity in the foam.
3. Remove the instruction/recipe book,
cleaning tool and bowl cover (A) from one
side of the foam block. Lift out the large and
small pushers.
4. Lift out the work bowls (B) and spatula (C)
from the other side of the foam block.
5. Remove the foam block and the cardboard
frame.
6. Remove the housing base (D) from one side
of the bottom of the box. Assemble the
work bowls on the base by placing them
over the shaft and using the handle to turn
the work bowl counterclockwise to lock it.
7. Place the food processor on the counter or
table. Read the Assembly and Operating
Instructions thoroughly before using the
machine.
8. The storage case (E) is on the other side of
the bottom of the box.
9. Lift out the storage case, unlock the cover
and remove the foam block; the small
metal chopping/mixing blade (F), dough
blade (G), large metal chopping/mixing
blade (H), and stem adapter (I), are each in
a cavity. CAREFULLY REMOVE THE
METAL CHOPPING/MIXING BLADE BY
GRASPING THE CENTER WHITE HUB
AND LIFTING IT STRAIGHT UP.
NEVER TOUCH THE BLADES, AS THEY
ARE RAZOR SHARP.
10. Pull out the drawer to the storage case
with the adjustable slicing disc (J), and
CAREFULLY REMOVE IT BY USING THE
PLASTIC HUB. DO NOT TOUCH THE
BLADE, IT IS VERY SHARP. The
reversible shredding disc (K) is also in the
drawer. Carefully remove the slicing disc
and shredding disc by using the plastic
hub. Remember to lock the parts in the
storage case when not in use.
11. Save the shipping cartons and plastic foam
blocks. You will find them very useful if you
need to repack the processor for moving or
other shipment.
NOTE: We recommend that you visit our
website, www.cuisinart.com for a fast, efficient
way to complete your product registration.
Drawer
G
F
K
J
I
H
E
D
A
B
C
Storage Cover
with Lock