Using your log splitter, Note, Danger – MTD 249-640A User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
USING YOUR LOG SPLITTER
Your log splitter is designed for safe, efficient,
operation. CARE, OF COURSE, MUST BE EXER
CISED THAT HANDS ARE KEPT AWAY FROM
MOVING PARTS.
A. Set throttle at maximum speed.
B. Engagement handle has three positions: Forward-
moves ram toward wedge. Neutral—ram stops in
place. Reverse—ram returns. See figure 20.
FIGURE 20
C. Maximum length that can be split is 23".
D. Place log on beam and hold in place with right
hand. See figure 21.
E.
Slowly move engagement handle forward until
ram rests against log. Release engagement handle
(Neutral).
F.
Remove your hand from the log and step behind
the ram. See figure 22.
FIGURE 22
G. Move engagement handle forward until log is
split.
NOTE
If you attempt to run the ram beyond
its normal stroke it will automatically
return the engagement handle to
neutral.
H. Move the engagement handle to the rear to return
ram.
DANGER
Never attempt to cut a log in half
with the log splitter. See figure 23.
Never stand next to the ram when
operating. See figure 24. Always stand
behind the ram.
FIGURE 21
10
FIGURE 23