MTD 645C thru 650C User Manual

Owneirs guide

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

OWNEirS GUIDE

• ASSEMBLY • OPERATION • MAINTENANCE •

5 and 8 H.P.

SHREDDERS

Model Nos.

645C thru 650C

(Model 645C Shown)

IMPORTANT!

Record the

Model No.

and

Mfg. Code

which

appear on your unit in the space below. You
must have these numbers, along with the date
of purchase, in order to receive warranty or ser
vice.

Important:
Read Safety Rules
and Instructions Carefully

MEETS ANSI SAFETY STANDARDS

MODEL NO.

MFG. CODE

Made

AMERICA

WARNING:

This unit is equipped with an internal combustion engine and should not be used

on or near any unimproved forest-covered, brush-covered or grass-covered land unless the
engine’s exhaust system is equipped with a spark arrester meeting applicable local or state
laws (if any). If a spark arrester is used, it should be maintained in effective working order by
the operator.

In the State of California the above is required by law (Section 4442 of the California Public
Resources Code). Other states may have similar laws. Federal laws apply on federal lands.

A spark arrester for the muffler is available through your nearest engine authorized service
dealer or contact the service department, P.O. Box 368022, Cleveland, Ohio 44136-9722.

FORM NO. 770-8583J

Table of contents

Document Outline

OWNEirS GUIDE