MTD Shredder 642D thru 648D User Manual
Owneirs guide, 5 and 8 h.p. shredders
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OWNEirS GUIDE
• ASSEMBLY • OPERATION • MAINTENANCE •
5 and 8 H.P.
SHREDDERS
Model Series
642D thru 648D
(Model 648D Shown)
IMPORTANT!
Record the exact Model No. and Serial No.
which appear on the frame of your unit in the
space below. You must have these numbers,
along with the date of purchase, in order to
receive warranty or service.
Important:
Read Safety Rules
and Instructions Carefully
MEETS ANSI SAFETY STANDARDS
MODEL NO.
SERIAL NO.
24D-64D
d
Made
^
in
AMERICA
WARNING:
This unit is equipped with an internal combustion engine and should not be used
on or near any unimproved forest-covered, brush-covered or grass-covered land unless the
engine’s exhaust system is equipped with a spark arrester meeting applicable local or state
laws (if any). If a spark arrester is used, it should be maintained in effective working order by
the operator.
In the State of California the above is required by law (Section 4442 of the California Public
Resources Code). Other states may have similar laws. Federal laws apply on federal lands.
A spark arrester for the muffler is available through your nearest engine authorized service
dealer or contact the service department, P.O. Box 368022, Cleveland, Ohio 44136-9722.
FORM NO. 770-8607L