MTD 242-610-000 - Manual (Page 11)

Model 610
PARTS LIST FOR MODEL 610 LOG SPLITTER
REF.
NO.
PART
NO.
CODE DESCRIPTION
REF.
NO.
PART
NO.
CODE DESCRIPTION
1 781-0038 Wedge Ass’y- 41 712-0158 Hex L-Nut 5/16-18 Thd.
2 710-0693 Hex Bolt 3/8-16x4.5" Lg. 42 737-0259 90° Adapter 3/4" Hose
(Gr. 5) 43 781-0021 Strainer Tube Ass’y.
3 736-0262 FI-Wash. .375" I.D. x .87" O.D. 44 737-0191 Adapter 1"x 1-1/16-12 Thd.
4 713-0433 Chain—Tow Hitch 45 726-0132 Hose Clamp 5/8"
6 710-0298 Hex Bolt 5/8-18x3.5" Lg. 46 727-0429 Suction Hose 1" I.D.
7 710-3130 Hex Bolt 3/8-16x3.25" Lg. 47 737-0265 90° Adapter
(Gr. 8) 48 717-0936 Two Volume Pump (Incl. Ref. 75)
8 727-0289 Tow Hitch Ass’y■ 49 712-0123 Hex Nut 5/16-24 Thd.*
9 750-0261 Spacer .375" I.D. x .625" O.D. 50 736-0119 L-Wash. 5/16" I.D.*
10 736-0169 L-Wash. 3/8" I.D.* 51 714-0122 Sq. Key 3/16 X .75" Lg.
11 712-3000 Hex Cent. L-Nut 3/8-16 Thd. 52 781-0097 Rear Coupling Support Bracket
12 781-0311 Beam Stand 53 710-0117 Hex Bolt 5/16-24 X 1.0" Lg.*
13 712-0337 Hex Nut 5/8-18 Thd.* 54 719-0278 Coupling Shield
14 736-0158 L-Wash. 5/8" I.D.* 55 717-0891 Flexible Coupling
15 781-0343 452 Oil Tank Ass’y. 56 710-0237 Hex Bolt 5/16-24 X .62" Lg.
16 738-0601 Shid. Bolt .62" Dia. x .475" 57 781-0098 Front Coupling Support Bracket
17 719-0269B Pusher Plate 58 710-0363 Hex Bolt 5/16-24x4.0" Lg.
18 717-1346 638 Hydraulic Cylinder 59 — Engine
19 737-0238 Pipe Nipple 1/2" NPTx2" Lg. 60 710-0409 Hex Bolt 5/16-24 X 1.75" Lg.*
20 737-0192 90° Solid Male Adapter 61 712-0241 Hex Nut 3/8-24 Thd.*
21 717-1347 Control Valve 62 710-0152 Hex Bolt 3/8-24 x 1.0" Lg.*
22 737-0153 Return Elbow 63 750-0442 Spacer .75" I.D. x 1.12" O.D.
23 726-0146 Adjustable Hose Clamp 64 781-0018 Axle Assembly
24 737-01^1 90° Solid Male Adapter 66 781-0033B Engine Frame Ass’y.
25 727-0430 HighTPressure Hydraulic Hose 67 734-1016 Wheel Ass’y. Comp.
29.5" Lg. 734-0872 Tire Only
! 26 727-0435 Return Hose 3/4" I.D. x 231/2" 68 734-0255 Air Valve
Lg. 69 721-0168 Bearing Seal
27 727-0307 Metal Pressure Tube 70 734-1017 Rim Only
28 745-0174 Cap 71 741-3028 N Bearing Cone
29 781-0036 Filler Tube Ass’y. 72 712-0299 Hex Slotted Nut 3/4-16 Thd.
30 721-0204 “0”-Ring .92" I.D. 73 734-0873 Hub Cap
31 720-0231 Ball Knob 74 714-0162 Cotter Pin 5/32" Dia.
32 747-0709 Control Handle 75 714-3024 Hi-Pro Key 1/8" X 1/2" Lg.
33 710-1036 Hex Bolt 3/4-10x4.5" Lg. 76 710-0604 Hex TT-Tap Scr. 5/16-18 x .62"
34 710-0442 Hex Bolt 5/16-18 X 1.5" Lg.* Lg.
35 781-0361 Beam End Plate 77 721-0205 Gasket Washer 5/16" I.D. x
36 721-0203A Gasket 3/4" O.D.
37 712-0203 Hex Nut 3/4-10 Thd.* 78 750-0497 Spacer .375" I.D. x .625" O.D.
38 736-0364 L-Wash. 3/4" I.D.* 79 741-3029 N Bearing Cup
39 712-0338 Hex Nut 1-1/16-12 Thd. 80 712-3017 Hex Nut 3/8-16 Thd. (Gr. 5)
40 736-0275 FI-Wash. .34" I.D. x .68" O.D.
*For faster service obtain standard nuts, bolts and washers localiy.
If these items cannot be obtained locally, order by part number
and size as shown on parts list.
NOTE
Specifications subject to change without notice or
obligation.
NOTE: The engine is not under warranty by the
log splitter manufacturer. . .If repairs or service
is needed on the engine, piease contact your
nearest authorized engine
— ------------
service outlet. Check the Find It Fast
“Yellow Pages” of your
in The
telephone book under Yellow Pages
“Engines-Gasoline.”
11