Poulan 166120 - Manual (Page 18)

СиьТСШЕ.И RESPONSIBILITIES
iff
Your
Clear
tion 0
hours
noi engine will
the foam pre-cl
©v©ry S03SOn.
of operation ore
13)
roperly us
■ I I
ice paper
■25 hou
r m i l e
fiite
'ery 100
service air ci€
on, wnicheverc
jnder dusty conditions ner more often
h em ( l( hl( ri( ) ^ uг! f IV i-r.
TO SERVICE PRE-CLEANER
Slide foam pre-cleaner off cartridge.
Wash it in liquid detergent and water.
Squeeze it dry in a clean cloth.
Saturate it in engine oil. Wrap it in clean, absorbent
cloth and squeeze to remove excess oil.
If very dirty or damaged, replace pre-cleaner.
Reinstall pre-cleaner over cartridge.
Reinstall cover and secure with knob(s).
TO SERVICE CARTRIDGE
Remove cartridge nut.
Carefully remove cartridge to prevent debris from en­
tering carburetor. Clean base carefully to prevent
debris from entering carburetor.
Clean cartridge by tapping gently on flat surface. If very
dirty or damaged, replace cartridge.
Reinstall cartridge, nut, precleaner, cover and secure
with knob(s).
IMPORTANT: PETROLEUM SOLVENTS, SUCH AS
KEROSENE, ARE NOT TO BE USED TO CLEAN THE
CARTRIDGE. THEY MAY CAUSE DETERIORATION OF
THE CARTRIDGE. DO NOT OIL CARTRIDGE, DO NOT
USE PRESSURIZED AIR TO CLEAN OR DRY
CARTRIDGE.
CLFAM AIR SCREEM fSee Fig. 14)
A'r m.rteiri must be kept tree cf dirt end ctialf to prevent
eugir'e da.'-^riage fior.'i c'serheating. Csear. //iti- 's .vire bn.r.-h
or compre.ssed uii to ra'iio'vt dirt and stubborn dried gum
iiDBiS.
ENGINE CtiOLING FINS (See- fig. 14|: ■ ■ ■
Remove any du dirt or i .i fnan t r gri. cooling fins to^
prevent engine fn n overheating.
• Remove .<;• mw- frori tiowe: hnimrig and lift housing
and dipstitf tube u- je.rblv off enume.
• Cover oil fill opr -iinq to prevent e itr/ ot dirt.
» Use compress^ J a»'or Riff btiRIt bmsh to thoroughly
clean engine cooling fins.
» To reassemble, reverse above procedure.
18