Muffler, Spark plugs, In-line fuel filter (see fig. 14) – Poulan 168191 User Manual
Page 19: Cleaning, Customer rfsponsibst itif
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CUSTOMER RFSPONSIBSt ITIF?.
MUFFLER
t and replace corroded muffler and spark arrester (if
- . ‘ V i
f
t
.lift [i:i
Irirniv,'
inspe
equipped)
SPARK PLUGS
Rf-Ol - -per*' plil'J- »1 tht br-qirininj of
fTi'/'K.iJ
't-d' : ' f eftrr
.'j*i h'-ui )f ''i ^ra.irn
occurs first Spark plug type ana gap setting are 5ho#n a i
PRODUCT SPECIF ICATIOr J5" < > n (.age 5 of thl'- manuai
IN-LINE FUEL FILTER (See Fig. 14)
The fuel filter should be replaced once each season. II fuel
filter becomes dogged, obstructing fuel flow to carburetor,
replacement is required.
•
With engine cool, remove filter and plug fuel line
sections.
•
Place new fuel filter in position in fuel line with arrow
pointing towards carburetor.
•
Be sure there are no fuel line leaks and clamps are
properly positioned.
•
Immediately wipe up any spilled gasoline.
CLEANING
•
Clean engine, battery, seat, finish, etc. of all foreign
matter.
•
Keep finished surfaces and wheels free of all gasoline,
oil, etc.
•
Protect painted surfaces with automotive type wax.
We do not recommend using a garden hose to dean your
tractor unless the electrical system, muffler, air filter and
carburetor are covered to keep water out. Water in engine
can result in a shortened engine life.
19