Blind stitch hem – SINGER W1268 User Manual

Page 37

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

BLIND STITCH HEM

1. Set blind hem lever to "BLIND" position from "M" position (Fig. 50)

2. Use standard zigzag foot (Fig. 50)

3. Set stitch length control at Number 3 or 4

4. Set Zigzag Width Stops to make Zigzag Stitch Width Lever be

movable almost.

Fig. 50

Blind stitch hems provide a durable hem finish that is almost invisible and comparable to hand

sewing.

Prepare the garment in the same manner as for hand hemming.

Step 1. If hem with folded edge is used, make first fold 3/8" deep.

Step 2. Turn hem the depth desired and baste 1/4" from upper edge. Press into place.

Step 3. Fold hem back toward right side of garment leaving 1/4" extended.

Step 4. Place material under presser foot, sew with stitch length set to suit material being sewn

and make a side wise stitch about every 3/4" of an^inch of sewing.