SINGER W1268 - Manual (Page 36)

34
THE ADJUSTABLE CORDING
AND ZIPPER FOOT
This attachment is used to make and
insert covered cording, and to sew in
zippers.
Loosen thumb screw to slide
foot to either right or left of needle.
CORDING. Fold bias strip of fabric
over cord. Loosen thumb screw and set
foot
so needle is centered in needle
hole. Machine baste cord in place
(Fig. 49).
To sew covered cord to material,
reset adjustable foot so needle stitches
closer to cord, and on edge of base
fabric.
Fig. 48
Fig. 49
Loosen thumb screw and slide foot so needle
enters center of needle hole. Guide metal of zipper
along edge of foot (Fig. 48). Stitching should be
close to zipper to allow easy opening and closing.
Adjust to sew from either right or left side, whichever
is more convenient.
■