How to use accessories – SINGER W1268 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

19
Remove
the
toothpick
and
wind
thread
under
button, forming a shank. Fasten.
Apply the above method to sew on buttons with
four holes, hooks, and snaps etc.
If a four hole button is to be sewn, follow the
same procedure above for the two hole button.
Now lift presser foot slightly and move fabric to
permit
stitching
the
remaining
two
holes.
Hooks,
snaps, etc., are sewn to the fabric with the same
procedure as for sewing two hole buttons.
HOW TO USE ACCESSORIES
NARROW
HEMMER.
With
the
needle
at
its
highest
position,
replace
regular
presser
foot
with
narrow hemmer (Fig. 28). For a plain narrow hem,
make a
1/8
inch double fold for about two inches
along edge of fabric. Hold each end of the two inch
fold, slip underneath hemmer. Bring fold up into
the scroll of hemmer. Draw forward to end and fas
ten with point of needle. Lower presser bar lifter.
Gently pull ends of thread as you start stitching.
Guide material slightly to right, and it will take
a double turn through scroll.
LACE TRIMMED HEM. To sew a narrow hem
and attach lace in one stitching, insert lace in the
.slot next to needle (Fig. 29). Sew hem as above,
guiding lace under needle and hem into scroll.
Fig. 28
Fig. 29