Cleaning änd oiling the shuttle, Cleaning and oiling shuttle – SINGER W1268 User Manual

Page 25

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CLEANING ÄND OILING THE SHUTTLE

(See Figs. 36 and 37)

The stitch forming mechanism occasionally becomes clogged with loose threads and lint. This

will interfere with the efficient operation of the machine. Cleaning and removal of the lint will

safeguard the performance. To remove the shuttle assembly, proceed as follows.

1. Turn the balance wheel until the needle reaches its highest position. Tilt head back on its

hinges.

2. Remove bobbin case (A), Fig. 36 and 37.

. Turn the two shuttle race cover clamps (B) outward and remove the shuttle race cover ( )

and shuttle body (D).

Fig. 37

Fig. 36