SINGER WS1145 - Manual (Page 9)

SEWING THIN OR LIGHT
WEIGHT FABRICS
When, lighter pressure is required to sew
satisfactorily on thin silk or filmy material, the
pressure cap should be about halfway down.
Release all the way by pressing the snap
lock, ((T), Fig. 19) and then press cap ((D, Fig.
20) down again to halfway spot.
Fig, 19
DARNING AND
MONOGRAMMING
In order to move the fabric freely in any
direction for darning, mending and certain kinds
of
free-hand embroidery, release the cap ((f).
Fig. 20) completely by pressing down on the
snap lock, C(T),Fig. 19). Set the lever to "DOWN",
which
drops the feed well below the needle
plate. To return feed to normal, set to "UP",
push cap down (Fig. 20).
12