Adjustable cording and zipper foot, Sewing in zipper, Cording and zipper foot – SINGER WS1145 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
THE
ADJUSTABLE
CORDING AND ZIPPER FOOT
This attachment is used to make and
insert covered cording, and to sew in zip
pers. Loosen thumb screw to slide foot to
either right or left of needle.
^
CORDING.
Fold
bias
strip
of
fabric
over cord. Loosen thumb screw and set
foot so needle is centered in needle hole
Machine baste cord in place (Fig. 32. 3 ).
Fig. 34
Fig. 32
^
Fig. 33
To sew covered cord to material, reset adjustable
foot so needle stitches closer to cord, and on edge
of baric.
SEWING IN ZIPPER
Loosen thumb screw and slide loot so needle
enters center of needle hole. Guide metal of zipper
along edge of foot (Fig. 34). Stitching should be
close to zipper to allow easy opening and closing
Adjust to sew from ether right or left si e, w ic
ever is more convenient.
-
22
—