Blind stitch hem – SINGER WS1145 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

BLIND STITCH HEM

Blind stitch pattern can be produced by the use of change cam No. 20.

Use standard zigzag foot.

Set stitch length control dial as you wish.

Set zigzag width control dial at number 0 position.

Blind stitch hems provide a durable hem finish that is almost invisible and com
parable to hand sewing.

Prepare the garment in the scune manner as for hand hemming.

STEP 1

STEP 2

STEP 3

STEP 4

Fig. 27

Step 1. If hem with folded edge is used, make first fold 3/8" deep.

Step 2. Turn hem the depth desired and baste 1/4" from upper edge.

Press into place.

Step 3. Fold hem back toward right side of garment leaving 1/4" extended.

Step 4. Place garment under presser foot and sew blind hem.