Embroidering sewing, Placing of pattern cams – SINGER WS1145 User Manual

Page 13

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

PLACING OF PATTERN CAMS

Open the cam cover lid (®, Fig. 25). Move zigzag

width control dial to "5^^ position. Hold the knob of
pattern cam to be place, and insert it into the axle

(D so that the groove ® of pattern cam put in the

pin d).

Then close the cam cover lid ®, and return zigzag

width control dial to "0" position.

Fig. 25

EMBROIDERING SEWING

Your machine can sew beatiful stitches with 24 pattern cams. Use zigzag presser foot and

zigzag needle plate. Replace desired pattern cam as noted on page 15.

For best results set zigzag width control dial to " 0 " position and stitch length near "O' as

possible.

(Pattern cams attached to the machine)