SINGER WS1145 User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Up into take-up lever from right to left.
Down through guide in thread bar.
Into guide inside face.
Through needle clamp guide and into

needle from left to right pulling three

or four inches of thread through needle.

Hold

the

end

upper

thread

loosely

and turn hand wheel toward you until the
needle goes all the way down and comes

back up. A loop (Fig. 11) will be formed
over the upper thread which then can be

pulled out

straight. Place both thread ends

under the slot of the presser foot and draw
toward

the

back

the

machine,

leaving

both threads three or four inches long.

Fig. 12