Adjusting the tensions, Setting the stitch length, The tensions – SINGER WS1145 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SETTING THE STITCH LENGTH
The length of the stitch is regulated by tte stitch length
^
shortest stitch and 5
left to shorten the stitch.
Th^rrer l?r slTl“orchoose^honld appear on indicator on the dial.
When yon Wish to sew bachward to tie the threads
^
hward1s“.or"
press in button R, (». Fig. 1) as far as rt will go. The machine wu
the button is held in.
adjusting
THE TENSIONS
aiwnns adiust the upper tension with the presser foot down, as
the fenm^ni "eased w'k'en it is raised. To increase the tension on
te upper thread, turn dial CFlg. 13) to the right, or o ocWe. To
decrease turn to the left. The higher the number on the dial the
tighter the tension. Before adjusting lower tension be sure ¿^bin
.
■ f-Hrcarif^d orooerly When necessary to change the bobbin
machine IS
threaded properly.
bobbin case
tension, turn small screw (Fig. 14) on siae oi i
clockwise to tighten, counterclockwise to loosen.
— 10 — -
Fig 13