SINGER 6510 Scholastic - Manual (Page 50)

□ The evenfeed foot optional accessory
The evenfeed foot accessory is optional. It is not included
with this machine.
Always try to sew first without the evenfeed foot accessory
which should be used only when necessary.
It is easier to guide the fabric and you have a better view of the
seam when using the standard, regular foot on your machine.
Your sewing machine offers excellent stitch quality on a wide
range of fabrics from delicate chiffons to multiple layers of
denim.
The evenfeed Foot accessory equalizes the feeding of the
upper and lower layers of fabric and improves the matching of
plaids, stripes and patterns. It also helps to prevent uneven
feeding of very difficult fabrics.
1. Lift the presser foot lifter to raise the presser foot bar (1).
2. Remove the presser foot holder by unscrewing
(counterclockwise) the presser bar attaching screw (2).
3. Attach the evenfeed foot to the machine as follows:
i) The arm (3) should fit into above the needle screw and
clamp (4).
ii) Slide the plastic attaching head (5) from your left to right
so that it is fitted into the presser foot bar.
iii) Lower the presser foot bar (1).
iv) Replace and tighten (clockwise) the presser bar attaching
screw (2).
4. Make sure both the needle screw (4) and the presser bar
attaching screw (2) are tightly secured.
5. Draw the bobbin thread up and place both the bobbin thread
and the needle thread behind the walking foot attachment.
Attaching head (5)
Arm (3)
Needle
bar
Needle screw & clamp (4)
Presser foot bar (1 )
Arm (3)
Presser bar attaching screw (2)
47