SINGER 6510 Scholastic User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

□ How to choose your pattern (For model- 3 dials)
For straight stitch select pattern (A) with pattern selector dial.
Adjust the stitch length with the stitch length dial. You may
choose any needle position, by turning the stitch width dial.
For zigzag stitch, select pattern (B) with pattern selector dial.
Adjust the stitch length and stitch width according to the fabric
being used.
To obtain any of the other patterns shown in the upper row on
the stitch selection panel, select the letter above the stitch with
the pattern selector dial. Adjust the stitch length and the stitch
width with the control dials according to the result desired.
To obtain any of the patterns on the second row, turn the stitch
length dial to "S", select the pattern desired with pattern
selector dial, and adjust the stitch width with the stitch width dial.
r
Reverse lever
Stitch width dial Stitch length dial
O'
IT
stitch display
Pattern
selector dial
WÛÆ
1
1
^ >
i>
5 i >
0 0 0 0 0 o o
I
s
$ i
}
Note: If your machine has these stitch patterns, it will be
referred to as "model- 3 dials" throughout this Instruction
book.
20