Blind hem/ lingerie stitch – SINGER 6510 Scholastic User Manual

Page 28

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

□ Blind hem/ lingerie stitch

For hems, curtains, trousers, skirts, etc.

'M'v.

Blind hem for stretch fabrics position "C" on pattern

selector dial (For model- 3 dials).

^...A Blind hem for stretch fabrics position "F" (For model- 2

dials) or "D" (For model- 3 dials) on pattern selector dial.

Set the machine as illustrated (1).

Note:

It takes practice to sew blind hems. Always make a sewing

test first.

Fold the fabric as illustrated with the wrong side uppermost (2).
Place the fabric under the foot. Turn the handwheel forwards
by hand until the needle swings fully to the left. It should just
pierce the fold of the fabric. If it does not, adjust the stitch width
accordingly (3).

Adjust the guide (4) by turning the knob (5) so that the guide

just rests against the fold.

Sew slowly, guiding the fabric carefully along the edge of the
guide.

Stitch width dial

Stitch length dial

(Top of machine)

Blind hem presser foot

<1 <;