Zippers and piping – SINGER 6510 Scholastic User Manual

Page 35

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

□ Zippers and piping

Set the pattern selector dial to (

Change to zipper foot.

) or ( I ).

The zipper foot can be attached right (1) or left (2) depending
on which side of the foot you are going to sew.

To sew past the zipper pull, lower the needle into the fabric,
raise the presser foot and push the zipper pull behind the

presser foot. Lower the foot and continue to sew.

It is also possible to sew in a length of cord, into a bias strip to

form a welt (3).

Set stitch length control between 1-4 (according to thickness of

fabric).