The set of hemmers, Hemmer set, Thesetof hemmers hemmer set -41 – SINGER W951 User Manual

Page 41

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

THE SET OF HEMMERS

Before attaching any of the hemmers be sure bobbin thread

is pulled up. Then, with hemmer in place, hold top thread loosely

and turn handwheel one full turn toward you, making a loop

under hemmer. Grasp bobbin thread with both hands and slip

horizontally under hemmer toward back. Bobbin thread will

catch loop and carry upper thread to back of hemmer.

Fold material to suit for two inches along edge, hold at each end

of fold. Slip fold into guide and up over spoon {Fig. 84|. Fold hem

in material back of hemmer. Draw forward to end of hem and fasten with point of needle. Pull on thereads gently as you

start stitching.

H E M M E R S E T

You can make a hem 1/4", 3/8", 5/8", or 7/8" in width, depending upon which hemmer you use.

■ 40