Straight stitching – SINGER W951 User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

llk^

==^

STRAIGHT STITCHING

For straight stitching on fine fabric or very soft material, it is

advisable to use the straight stitch presser foot and the

straight stitch needle plate. Both are included in your

accessory box and have narrow needle slots.

¡1) Change the toot and plate screw 13

(Fig. 1) and remove zigzag foot.

Replace with hinged straight stitch foot and tighten screw

securely (Fig. 23).

To change needle plate remove the two screws holding it in

place and remove.

Replace with straight stitch plate (Fig. 24).

(2)

Set neolle position lever "31" (Fig. 25) at "M".

(3)

Set zigzag width lever "6" at "0" and lock in position

with locks "7".

(4)

Set stitch length control at "1" on desired stitch length.

¡5) Set decorative stitch design control at "M".

Fig. 25

13-