SINGER WSL216 - Manual (Page 5)

SPOOL HOLDERS
For large diameter cone spools use the
rubber spool holders with the large end at the
top, and for small diameter ones, use the
same rubber spool holders with small end at
the top.
Always use the extension plate with spool
holders.
SPOOL CAPS
When using reel type thread spools, remove
the spool holders and place spool caps over
the thread spools.
SPOOL NETS
Polyester (filament) threads, or bulk nylon
threads are likely to loosen off the spool while
unwinding, causing thread tangling or inter­
mittent irregular thread feeding. To keep
consistent unwinding of such threads, hence
constant balancing of thread tensions on
stitches, utilize the spool net supplied in the
accessories, by sleeving it over the spool as
illustrated.
Cone type thread '■
Extension
plate
Reel type thread
"T ■ ' *
TSpopl cap V
, ThPWd comes;-
,. ..voff^e.top ,i¡^.
Net
■ ■" Net'
'*5!
Spool
rííJW'