Optional accessories, Attaching elastic tape using elastic foot – SINGER WSL216 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

5. OPTIONAL ACCESSORIES

Optional Accessories described in this section

are not supplied with this Machine as
standard equipments, but can be obtained

from the Dealer who supplied your Machine

or by contacting us direct.

ATTACHING ELASTIC TAPE

USING ELASTIC FOOT

1. Replace regular foot with elastic foot.

2. Set stitch length to about 4.

3. Slightly raise the roller portion of the foot

and insert elastic tape between the roller
and the lower support bar as illustrated,

until the edge of elastic reaches the feed
dog teeth. (It may be necessary to loosen

the Tension Control Screw on the Roller
to feed the Elastic through).

4. Sew the elastic tape for about one inch or

so to confirm the tape is being properly
sewn.

Place the fabric under the foot and sew

together with the elastic tape.

Check that the Stitch formation is

uniformally balanced and if necessary
adjust the Thread Tension Controls.

7. Adjust the Tension Control Screw of the

Roller so that the desired finish can be

obtained.

a. Tighter tension of the Roller gives more

elasticity of the fabric after it is sewn.

b. Looser tension of the roller gives less

elasticity of the fabric.