Checking performance problems, Lncpr№c.t\f, T- skipping – SINGER WSL216 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I:
INWARD CURVES (Concave)
When sewing on inward curve, guide the
fabric gently in the way that the seam line is
passing through under the front right edge of
presser foot (or a bit inward towards left),
constantly applying light pressure by left
hand at point A and by right hand at point B,
in the directions as indicated by arrows on
illustration.
OUTWARD CURVES (Convex)
Do the same way as for sewing on inward
curve, but applying pressures in the opposite
directions at points A and B respectively, as
indicated by arrows.
FINISHING SEAM ENDS
When sewing work has been done, it is
recommended that both ends of the seams
be finished with a little extra work.
LOCK STITCHES
Using an embroidery needle, bring back 2 or
3 cm of extra chains through the lock stitches
already made on the fabric as illustrated.
DOUBLE-CHAIN STITCHES
Make a knot with lower looper thread and
needle thread at both ends of the seam.
REMOVING STITCHES FROM
FABRICS
To remove the stitches already sewn on
fabrics, wherever necessary, snip off needle
thread
at
intervals
and
pull off
looper
thread(s).
3. CHECKING PERFORMANCE PROBLEMS
iirPRdfeLEM ' Ü' .
t- - -
ÇOWWËCTION
Irrediilar,
■ lncPr№c.t\f™
' l'ncôïfècwz^^eeaw,,.
S -BfeaKing.j i
iliTipropdr
l.Ldos'e PriK^^QOtiJ
^Incorrect
:
I
n
c
o
r
r
e
c
t
¿
.
r
Loosia Pres^.E^PO^»''
’I nbdtreclSri^icf
_
ihfelii. ft
Reset
Thread
Tension(s).
: '
^
.
■'fe Choose correct size Needle for Thread
' v-W '■ Pahrin
and Fabric.
Re-thread Maichinaii.^
Do not pull Fabric; guloeft gently.
Reset Presser Foot. ■
[t- Skipping'*':
%
y^S'raoking', ^
vThfeads-^- w
Do not pul! Fabric; guide it gently.
Choose correct size Needle for Thread:
and Fabric.
ResetNeedle.
, n "■
Reset Presser Foot.
Reset Thread tension'ls).;,;
insert new Needle. ‘ v
Reset Presser Foot. ,
Re-thread Machine. .
(
Choose correct size Needle for Thread
and Fabric.
.t' ,,
Insert new Needle. _
Reset Needle;
I'irdjpropor fhrMdlngiw-
.i-THrééd TwaM^ltP^B^^
’il hcOirect Mtd™ 9,f
Tlviedd'Si№!;Mh9l^i^
iThread, Sujÿe'Pbtelr^B^de^
Re-thread Machine:
^ " ’^111
1 nsert new Needle.. ^
^
Reset ThreadTenaionlsV.
■ >1,^'■
„ResetNeedle.-
.'iiV
Reset Spool properly.,, I
Fully extendpuide Pole-:
?(: ■ .a-iK