Chapter 7. twin - needle stitching, Chapter 7. twin-needle stitching, Twin – SINGER 4314 User Manual
Page 37: Chapter 7, Needle stitching
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter 7.
Twin
- Needle Stitching
The
twin-needle
simultaneously
produces
two
parallel,
closely
spaced
lines
of
pattern
stitch
ing. You can stitch with either one or two col
ours of thread.
Pattern Group Selector: Stitch desired
-I only
• Needle Position: 1—
• Stitch Width:
—'*Y'»/yV\
only-^^
0
1 ; 2 ; 3
A
•
Stitch Length: . 5 - 4 to suit fabric
• General Purpose Needle Plate
• General Purpose Foot or Special Purpose Foot
Procedure
• Insert twin-needle.
•
Thread
as
for
single-needle
stitching,
and
through
right
eye of needle.
•
Attach detachable spool pin, with felt, in hole
on top cover.
•
Place
spool
of
thread
on
detachable
spool
pin and thread machine in usual way.
•
Thread
through
remaining
points,
making
cer
tain to
omit the thread guide above the needle
and pass thread through
left
eye of needle.
CAUTION: Do not use a stitch width greater than what is recommended. A wider stitch will result in needle breakage.
35