Chapter 4. basic zig-zag stitching, Chapter 4, Basic zig-zag stitching – SINGER 4314 User Manual
Page 21: Lj. j, Adjusting machine stitch to suit your fabric, How to set selectors
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Chapter 4. Basic Zig-Zag Stitching
adjusting machine stitch to suit your fabric
You
can
do
functional
as
well
as
decorative
zig-zag stitching with your sewing machine.
How to set selectors
PATTERN GROUP SELECTOR
Before moving selector, make sure needle is
out of the fabric.
For plain zig-zag stitching:
• Set stitch width selector on o (straight stitch)
• Turn pattern group selector to
1
aligning
number under I mark
• Pattern Group Selector:
1
• Needle Position:L-:,
• Stitch Width:-i'''^'AAAA:
0 ; I 2
3
4 ;
• Stitch Length:.5 - 4 to suit fabric
• General Purpose Needle. Plate
® General Purpose Foot
NEEDLE POSITION SELECTOR
Before moving selector, make sure needle is
out of the fabric.
Most
of
your
zig-zag
stitching
will
be
done
in
centre J. needle position.
Left L. and right settings are used for
special stitch placement, as in button sewing.
STITCH WIDTH SELECTOR
Before moving selector, make sure needle is
out of the fabric.
To produce a plain zig-zag or a decorative
stitch, the stitch width selector is moved from
its straight stitch position
o
to any of its
other five positions. The further you move the
selector lever toward the right, the wider your
stitch will be.
2|
<
Pattern Group Selector
Left
Centre
Right
L
J.
J
Needle Position Selector
4
—-
v
\
aa
A/\/\
stitch Width Selector
19