Threading the bobbin – SINGER W610 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
THREADING THE BOBBIN
Fig.
5
Step 1 (illustrated in Fig.
6). Hold bobbin
case between thumb and forefinger of left
hand so that the slot in the edge of the
bobbin case is on top. Take the bobbin
between
thumb
and
forefinger
of
right
hand so that the thread on top leads from
left
to
right.
Step
2
Insert
bobbin
Into
bobbin case, pull the thread into the slot
of the bobbin case as shown in Fig. 7 and
draw it under the tension spring and into
the fork-shaped opening of the spring as
shown in Fig.
8.
SLOT
^TENSION SPRING
. S i '
Fig. 6
Fig. 7
Fig. 8
This manual is related to the following products: