Blind stitch hem – SINGER W610 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
18
BLIND STITCH HEM
Use standard zigzag foot (Fig. 29).
1. Set stitch length control at number 2 or 3.
2. Set decorative stitch dial for blind stitching.
Blind stitch hems provide a durable hem finish that is almost in
visible and comparable to hand sewing.
Prepare the garment in the same manner as for hand hemming.
Step
1. (Fig. 30).
If hem with folded edge is used make first fold 3/8 inch deep.
Step
2. Turn hem
to the depth desired and baste 1/4 inch from upper edge. Press in place.
Step
3. Fold hem
back toward right side of garment leaving 1/4 inch extended.
Step
4. Place material under presser foot, sew with stitch length set to suit material
being
sewn and make a side wise stitch about every 3/4 of an inch of sewing.