Decorative stitch design patterns, Multiple zigzag stitches – SINGER W610 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

DECORATIVE STITCH DESIGN PATTERNS
Be sure the zigzag presser foot and needle plate are in position.
To sew the decorative design patterns illustrated on the Pattern delector dial (5, Fig. 1) set
the machine as follows;
1.
To select stitch design pattern you desire hold release lever (
6, Fig. 1) to the right as
far as it will go then turn decorative stitch dial to stitch selected.
2. Set buttonhole lever (10, Fig. 1) at “M”.
3. Set stitch length control (14, Fig. 1) as close to O as possible without stopping the
feeding for a very compact design. By increasing the feed the design will be longer but
not quite so compact.
MULTIPLE ZIGZAG STITCHES
Use when replacing worn blanket bindings for both a decorative and durable finish, when
overcasting an edge to prevent fraying, also when applying elastic waist bands to skirts and
dresses.
Be sure to stretch the elastic as it is applied to Insure fullness required in the garment.
There are hundreds of other uses for these stitch designs which will become apparent as
you use the machine.
17
Fig. 27
A
/s.
^
A
A
A
/ \ / \ / \ / \ / \/
/ V
V
V
V
V
A A A
• \ ! \ * \
’ \ / \ / \
V
V
V
A
A
/ \
'/ \
Fig. 28