SINGER W1624 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

120V

220V

OFF

CONNECTING FOOT CONTROLLER

1 AND POWER CORD

Connect foot controller and power cord ®

y" /

Before plugging in your machine, be sure that

i the voltage is same as that of your machine.

(written on a plate at back of machine)

Confirm the socket is 110V or

220V, then be sure the position
of voltage selection Swith correct,

or not? If not, use screwdriver

to adjust the switch.

(DWhen electricity voltage on 220V.

(2)When electricity voltage on 120V.

Switch on, power to the machine

and turn on the sewing light.

Switch off, power off to the machine

and turn off the sewing light.

The more you press foot controller,

the faster the machine runs.