SINGER W1624 User Manual
Page 43
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
^he material not fed
correctly
• Incorrecting setting of stitch length.
» Lint on the feed dog.
P.16
^
P.35
Breaking needle
• Needle not correctly inserted.
• Needle bent
• Needle clamp screw too loose.
• Upper thread tension too tight.
• Needle too fine for the material.
• Dials have been changed while needles was down on the material.
P.14
P.14
Tighten needle
dame
P.9
P.15
Exchange needle
Heavy torque or
noise
• Lint inside the shuttle race.
• Lint on the feed dog.
P36
P.35
Machine doesn't run
V
• Power plug is not plugged correctly.
• Bobbin winder spindle is on right position, (under bobbin winding position)
• Thread jams inside the shuttle race.
.................................................... ............................................................. ...................................
P.4
P.12
P.36
____
J
For any other problems occured, or exchange of the parts, please consult with your dealers, or stores from which machines are
purchased.
-39-