Set size of buttonhole, Attach buttonhole foot – SINGER W1624 User Manual

Page 27

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

BUTTONHOLE SEWING

SET SIZE OF BUTTONHOLE

Pull the buttonhole holder to the back

until the end, place the button in it,

push the stopper backwards trapping

the button in between the buttonhole

holder and stopper, and fully tighten

by fixing the screw. Remove the

button.

ATTACH BUTTONHOLE FOOT

Draw up the lower thread.

Pull the thread of the needle thread through

the needle hole of the buttonhole foot, attach

the buttonhole foot and draw both needle

thread and lower thread to the left. Insert the

fabric under the foot, and lower the needle

at the starting point.

Than lower the buttonhole foot.