Embroidery – SINGER W1624 User Manual

Page 38

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

10. EMBROIDERY

Set machine as shown.

Remove foot, and holder screw.

To avoid lower thread being pulled up,

reduce upper thread tension.

The lever © is in the right side of shuttle cover.

For normal sewing, push the lever tO-AAA-position.

To lower feed dog, push the lever to-^AA"

position.

This position is used for button sewing, darning

and embroidery.

Pull up lower thread by turning handwheel towards

you while holding upper thread lightly.
Lower presser foot lifter.

Grasp lower thread then make two or three stitches,

snip off excess threads.

Start sewing along outline of design with satin stitch.

Continue sewing with guiding hoop by hand.

To finish filling, sew several straight stitches.

Lay typewriting paper underneath when embroider

ing sheer fabric.

-34-