Also remember to, Caution – SINGER 1021 User Manual
Page 52
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PERFORMANCE CHECKLIST (Continued)
If
Stitching
is
irregular, or needle
thread breaks, make sure ...
Machine is correctly threaded.
Thread is even and free from knots.
Needle is straight and sharp, and correct size for thread.
Needle-thread tension is not too tight.
Bobbin case is correctly threaded and properly inserted.
Threads are correctly placed under presser foot when you start to sew.
Bobbin case area is free of lint and loose thread ends.
Bobbin or bobbin case is not damaged.
Also remember to ...
Turn hand wheel toward you to position needle and take-up lever.
Raise needle above fabric before making adjustments to stitch width and
needle position.
Start and finish sewing with take-up lever in its highest position.
Adjust stitch length, pressure, and thread tension to suit your fabric
Test stitch on a fabric sample before starting a sewing job.
Lower presser foot before setting pressure dial.
Tighten hand wheel knob and disengage bobbin winder after winding a
bobbin.
Remove feed-cover needle plate after button sewing and after darning
with an embroidery hoop.
Clean your machine periodically.
CAUTION
Do not attempt to adjust the motor drive belt.
Refer to your nearest Service Centre
should any adjustment be required.
48