Cleaning the machine, Warning – SINGER 1021 User Manual
Page 48
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
cleaning the machine
Your machine will serve you perfectly for many years if you take a few
moments of your time to keep it clean. How often you will need to clean the
machine will depend on how often you use it.
WARNING:
Before cleaning your machine^ disconnect power-
-line plug from electrical supply.
Clean between
tension discs
Clean
y
Remove lint frdm exposed parts.
With a soft cloth, clean:
•
Tension discs, take-up lever, and
thread guides.
• Presser bar and needle bar.
• Bobbin case. (If there is an excessive
amount of lint in the area, remove the
bobbin case for cleaning. See page 45
for instructions.)
• Machine surface. (If necessary, dahnpen
thecloth and use a mild soap.)
Remove face plate as instructed on page
45 and clean area behind it with a lint
brush.*
Remove needle plate as instructed on
page 7 and, using a brush, clean the
rotating hook area under the needle plate
and slide plate.
NOTE: Your machine requires oiling at
only one point under normal condi
tions.
* Brush not
included
with
machine
accessories.