SINGER 1021 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
STRAIGHT STITCHING (Continued)
KEEPING THE SEAM STRAIGHT
As you stitch, use one of the numbered
lines on the needle plate as a guide for
keeping the seams straight. Numbers in
dicate distances in eights of a cm from
the needle. If you want a 1.5 cm seam, for
example, keep the righthand edge of your
fabric on the number 5 guideline.
Using Guidelines
Fabric after Turning
Pivoting at Corner
TURNING SQUARE CORNERS
To turn a square corner 1.5 cm from
the fabric edge, you need not measure
or mark thé seam. Simply use the
crosslines on the slide plate.
• Line up your fabric with right or left
guideline 5 on the needle plate. Stitch
seam, slowing speed as you approach
corner.
• Stop stitching, with the needle down,
when the bottom edge of the fabric
reaches the cornering crosslines on the
slide plate.
• Raise presser foot ^and turn fabric on
needle, bringing bottom edge of fabric
in line with guideline 5.
• Lower the presser foot and stitch in new
direction.
20