^o. qleatt shutti^ race – SINGER W3051 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

?S.

^o. Qleatt Shutti^ Race

When the thread is tangled in the race or dust gets into

the space between the shuttle and shuttle race, follow this

procedure

1. Raise the needle bar to its highest position and take out

the bobbin case.

Fig. 9

Fig. 10

2. Release the KNOBS (A) on both sides of shuttle race by

pulling them sidewise, then take out the race cover B

and the shuttle. (Fig. 9, 10

3. After shuttle race and bobbin case have been cleaned, put

all of them back in reverse order.

4. Snap knobs into place as seen in Fig. 9.