Flemme, ike q4joàk, Fo, a (lecfddjxue ike *7knead *7etfdia*i – SINGER W3051 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
9. flemme, ike Q4Joàk
1. Raise the needle bar to its highest position by turning the balance
wheel toward you,
2. Raise the presserò foot by lifting the presser bar lifter.
3. Move the fabric back to the left and cut off the thread by passing
it over the thread-cutter above the presser foot.
4. Leave both ends of the thread a few inches long, under and to the
back of the presser foot.
fO, a (lecfddJxUe ike *7knead *7etfdia*i.
For ordinary stitching the tension of the upper and
lower threads should be equal so as to lock both
threads in the center of the material (Fig. 1 4 ) . If one
tension is stronger than the other, imperfect stitching
will
result.
Fine
materials
require
a
light
tension,
while heavy materials require more tension to obtain
a perfect stitch.
To INCREASE the tension, turn the thread tension
indecator (Fig. 15) clockwise.
TO
LESSEN
the
tension,
turn
the
thread
tension
indicator to the opposite direction. (When regulating
tension always have the presser foot down).
H
Fig. 14 Correct Stitch
Needle Threed Tension too strcn
Needle Thread Tension too weal
Fig. 15