*7o ¿/ie set f^eed-le – SINGER W3051 User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

^¿1^1

6. operate the foot control or knee

control in the same manner as far

sewing and when the bobbin is

completely full it will stop turning

automatically.

Remove bobbin from spindle. Hold

balance wheel firmly v/ith the left

hand and with the right hand turn

clutch away from you until it can

not

moved

any farther. The

needle bar now moves with the

tuning of the balance wheel.

NfEDLE BAg_

THBEAD GUW?D

NEEOLE

HOLE

•

needle

BAR

--CUMP

SCREW

'''NEEDLE

CLAMP

-NEEDLE

^,'THREAD

Fig.

.NEEDLE

---FLAT

SURFACE

Fig. 2

<2.

*7o ¿/ie Set f^eed-le

Turn the balance w-heel toward you, raising needle be

its highest position, and loosen the needle clamp scre^

Hold the needle in the left hand with the point down,

insert the needle up into the needle clamp as far as it

go, with its flat surface to the right ; then retighten

clamp screw (Fig. 3.(