SINGER 631 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Srn'C:H WIDTH AND NliEDI.H POSITION SEU-Cn'OR

4 S

I , ! . I

A Stitdi widlh or needle position settiny is necessary for both straight and zig/.ag stitching.
When used with a straight stitdi setting, the lever ¡ilaces stitching in left, centre or right needle position

{see pages 26 and 27).

When used with a decorative stitdi settinci, the lever controls width of primaiy patterns and produces

variations of combination ¡patterns (see pages 41 and 43).

To position, depress lever and slide it left or right to desired setting. Numerals indicate five positions

but intermediate settings may also be used.

PATTERN Slil.liCTOR

Please note.': Do not make selector adjustments while the needle is in the fabric.

When make Patletn selection set stitch width lever at 3,

PATT'ERN .SEUiC'I'OR

To Select Rettuired Pattern

1. Depress Push Button A and keep

depressed until selection is com

pleted.

2. ihish Pattern Selector Buttons.
,3, Select lequired Pattern.
4. Release Pattern Selector Buttons.

5. Release Push Button A.

I, N P R

K|M|0|

| Special

M I I I I I I I

A 1 C I E j G I f

B D F H J

Settings from K through Special are

made by the upper button.

Settings from A through J are made by

the knver buttou.